Hello, I'm running into big issues with my FPS while I'm in exterior cells in tes3mp. While I'm indoors my fps is up in the 100+, but when I go outside it drops to around 5, sometimes 1 fps. This only happens while I'm using the openmw engine, specifically TES3MP.
If it helps, these are my computer specs: ---ASUSTek Motherboard 9FX PRO R2.0 ---AMD FX-6300 ---ST1000DM003 ---AMD Radeon Strix R9 390 ---G.Skill Ripjaw 8GB x 2 ---H80i v2
Thanks!
Low FPS while outside (tes3mp)
Re: Low FPS while outside (tes3mp)
Press F3 a couple of times to get detailed information on why the FPS is slow. I would guess it is the physics that hits the roof, it's usually the case. If it's not specifically the physics thread that causes it, you might get helped if you use this mod.
-
- Posts: 7
- Joined: 14 Jan 2018, 00:15
Re: Low FPS while outside (tes3mp)
Thanks for the reply, I'll check out both of those and report back.
-
- Posts: 7
- Joined: 14 Jan 2018, 00:15
Re: Low FPS while outside (tes3mp)
It does seem to be the Physics that's taking most of the draw, let's see if the mod will work too.
-
- Posts: 7
- Joined: 14 Jan 2018, 00:15
Re: Low FPS while outside (tes3mp)
Downloaded the mesh override and it did not seem to work. but at the same time it didn't show up in my data files so I'm not sure if I did it right.
- DestinedToDie
- Posts: 1181
- Joined: 29 Jun 2015, 09:08
Re: Low FPS while outside (tes3mp)
TES3MP is more demanding than main branch OpenMW. Have you tried to see what fps you get on single player OpenMW?thegerm144 wrote: ↑14 Jan 2018, 00:19This only happens while I'm using the openmw engine, specifically TES3MP.
-
- Posts: 7
- Joined: 14 Jan 2018, 00:15
Re: Low FPS while outside (tes3mp)
Just tested OpenMW, and it does appear to be just tes3mp. I don't believe it's a hardware issue, because like I said, I had a laptop that ran it better.
-
- Posts: 256
- Joined: 19 Jul 2016, 01:02
Re: Low FPS while outside (tes3mp)
Can you try setting your OPENMW_PHYSICS_FPS to a lower value like 30 or 20 and reporting back on the results?
OPENMW_PHYSICS_FPS is explained here:
https://wiki.openmw.org/index.php?title ... _Variables
OPENMW_PHYSICS_FPS is explained here:
https://wiki.openmw.org/index.php?title ... _Variables
-
- Posts: 7
- Joined: 14 Jan 2018, 00:15
Re: Low FPS while outside (tes3mp)
How would I change the environmental variables?
-
- Posts: 7
- Joined: 14 Jan 2018, 00:15
Re: Low FPS while outside (tes3mp)
Found where environmental variables are and how to apply it. It seems to be working now, thanks ma'am.