eGPU stuff

Not about OpenMW? Just about Morrowind in general? Have some random babble? Kindly direct it here.
User avatar
lysol
Posts: 855
Joined: 26 Mar 2013, 01:48
Location: Sweden

Re: eGPU stuff

Post by lysol » 04 May 2018, 10:13

raevol wrote:
04 May 2018, 01:42
My information could be outdated, but my understanding was that Ubuntu Studio rolled a new kernel, which is a prime culprit for driver issues. A lot of the Ubuntu knockoffs, like Mint and I am guessing Budgie, do weird stuff like that, so if you really want to test driver support you should try vanilla. Doesn't mean you have to stick with it, but you can at least isolate the problem.
Ah. I'll keep that in mind if I have to reinstall again. Thanks.
AnyOldName3 wrote:
03 May 2018, 13:45
I have a suspicion that the best AMD drivers are Wayland-only, so if you're still having issues and Ubuntu switched back to Xorg, that might be something worth Googling.
I'll have a look at that, even though psi's experiences tells otherwise. Why? Because when the graphics card actually wants to boot up, the computer freezes within a few minutes of use.
Normal mapped texture replacers, exclusive for OpenMW:
My Nexus page

User avatar
psi29a
Posts: 3654
Joined: 29 Sep 2011, 10:13
Github profile: https://github.com/psi29a/
Contact:

Re: eGPU stuff

Post by psi29a » 04 May 2018, 10:31

I'm having issues with hdmi and the displayport on bionic, just noticed (I usually don't hook up external monitors). It will either freeze after a few minutes if I plug the cable in mid-session or if I'm just logging in for the first time, I can't get past GDM login, it always crashes back to GDM regardless of windowing environment (gnome3, budgie, whatever).

User avatar
lysol
Posts: 855
Joined: 26 Mar 2013, 01:48
Location: Sweden

Re: eGPU stuff

Post by lysol » 04 May 2018, 12:05

Really now? Maybe I should try out 17.10 instead.
Normal mapped texture replacers, exclusive for OpenMW:
My Nexus page

User avatar
lysol
Posts: 855
Joined: 26 Mar 2013, 01:48
Location: Sweden

Re: eGPU stuff

Post by lysol » 09 May 2018, 20:36

Small update: It could be as simple as badly shielded cables. I asked at the /r/eGPU subreddit, and a guy there said that the cables the exp gdc beast (the m.2 to pcie adapter) comes with have bad shielding, and that this could be why the computer only detects the graphics card only every now and then. Sounds reasonable, since the graphics card is placed just beside my printer.....

I googled a bit, and I'll try wrapping the cables in aluminium foil. Suddenly this project got a ghetto rating of 11/10. :roll:
Normal mapped texture replacers, exclusive for OpenMW:
My Nexus page

User avatar
AnyOldName3
Posts: 778
Joined: 26 Nov 2015, 03:25

Re: eGPU stuff

Post by AnyOldName3 » 09 May 2018, 20:41

If the foil works, you might be able to de-ghetto it by putting heat-shrink tubing over the foil. That always makes things look a zillion times more professional.
AnyOldName3, Master of Shadows

User avatar
lysol
Posts: 855
Joined: 26 Mar 2013, 01:48
Location: Sweden

Re: eGPU stuff

Post by lysol » 09 May 2018, 21:42

That's a great idea actually.
Normal mapped texture replacers, exclusive for OpenMW:
My Nexus page

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests