Elder-scrolls IV Oblivion

Feedback on past, current, and future development.
Argoon
Posts: 1
Joined: 09 Feb 2017, 16:45

Re: Elder-scrolls IV Oblivion

Post by Argoon » 09 Feb 2017, 16:52

cc9cii wrote:An update - https://youtu.be/mM1lE8frdYc

Now the visible meshes move and a light source was added but there are many issues still. The lamp doesn't collide with the ceiling and I'm not sure how to add a flame to the lamp. The impulse from the collision with the player is way too large. Just a small bump sends the lamp flying off...
Oblivion uses Havok you are using Bullet i assume, so perhaps both physics engines use different calculations for forces, mass, etc, is very improbable that you will have a 1 to 1 conversion between to different physics engines, so adaptation will need to be made.

Btw hi guys "new" user here. (old viewer of the forum but never registered until now) ;)

Darklight
Posts: 2
Joined: 03 Mar 2017, 05:14

Re: Elder-scrolls IV Oblivion

Post by Darklight » 05 Mar 2017, 22:45

anahuj wrote:
EmperorArthur wrote:Scrawl and Zini have both said NO!!! to this multiple times.

I've looked at the feasibility of expanding our NIF importer to use later versions of texture files, so moders would have more readily available content, but was shot down immediately.
I don't know reason for "no" but use of later versions of texture files has been forbidden by Bethesda: Oblivion textures/models cannot be used in a Morrowind mod.

Maybe better to document OpenMW and Morrowind functionality. Then document Oblivion functionality as starting point to OpenOblivion. I have decoded Oblivion and Fallout 3 ESM/ESP file formats extensively but I don't know how the data is used in the engine.
That isnt going to stop anyone from doing it. And if iam not mistaken it has been done already and posted on youtube as well as the nexes not the entire content of oblivion but sure bits and pieces of it

ezze
Posts: 426
Joined: 21 Nov 2013, 13:20

Re: Elder-scrolls IV Oblivion

Post by ezze » 06 Mar 2017, 09:18

The real answer is not "No".

The real answer is on the terms of:
"We do not have the workforce, and we won't it even consider it at least until 1.0. Even then supporting Oblivion is a large project on its own so we will probably focus on Morrowind. Still if you do have the workforce feel free to fork just like the tes3mp project is doing in this very moment. After 1.0 we might consider a merge."

micidre
Posts: 6
Joined: 03 Jan 2017, 11:50

Re: Elder-scrolls IV Oblivion

Post by micidre » 20 Jul 2017, 07:31

Has this been abandoned?

Thunderforge
Posts: 124
Joined: 06 Jun 2017, 05:57
Github profile: https://github.com/Thunderforge

Re: Elder-scrolls IV Oblivion

Post by Thunderforge » 20 Jul 2017, 22:05

micidre wrote:
20 Jul 2017, 07:31
Has this been abandoned?
Abandoned by whom? As the post right before it says, if you would like to fork the project the same way that tes3mp has, you're welcome to add the code and make plans to merge it later. But the current project maintainers do not plan on doing this, and nobody has thus far tried to port all of Oblivion over.

micidre
Posts: 6
Joined: 03 Jan 2017, 11:50

Re: Elder-scrolls IV Oblivion

Post by micidre » 04 Aug 2017, 16:29

Thunderforge wrote:
20 Jul 2017, 22:05
micidre wrote:
20 Jul 2017, 07:31
Has this been abandoned?
Abandoned by whom? As the post right before it says, if you would like to fork the project the same way that tes3mp has, you're welcome to add the code and make plans to merge it later. But the current project maintainers do not plan on doing this, and nobody has thus far tried to port all of Oblivion over.
Nevermind I was just being dumb. PS I havent been on the forum for a while xD

JohnMaster
Posts: 8
Joined: 09 Aug 2017, 05:32

Re: Elder-scrolls IV Oblivion

Post by JohnMaster » 12 Aug 2017, 11:10

Thunderforge wrote:
20 Jul 2017, 22:05
Abandoned by whom?
I'm more concerned about cc9cii. I hope it's only good things in real life that have kept cc9cii away.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest